1·Curing agent for thermosetting powder coatings.
热固性粉末涂料固化剂。
2·The energetic curing agent C has good physical compatiblity with GAP.
合成的含能固化剂与GAP有良好的物理相容性。
3·Besides, the content of curing agent affects the color of the cured product greatly.
此外，硬化剂含量对硬化生成物之颜色亦影响甚钜。
4·Therefore it becomes a tendency to develop nonionic type waterborne epoxy curing agent.
开发非离子型水性环氧固化剂是其发展趋势之一。
5·Some typical chemical structures of curing agent and their synthesis processes are introduced.
介绍了这三类含磷固化剂的典型化学结构以及它们的合成。
6·A new lag inflating curing agent could be developed by controlling the expanding speed properly.
通过对快速膨胀变形的适当控制，可开发出滞后膨胀式脱模养护剂。
7·The relations between the time of surface drying and the quantity of curing agent was established.
测定了固化剂用量与涂膜表干时间的关系，表干时间随固化剂用量的增多而减短。
8·The application of curing agent bisphenol-AF and accelerator BPP to fluorine rubber was investigated.
对硫化剂双酚af，促进剂bpp在氟橡胶中的应用进行了研究。
9·The cathodic electrophoretic coating of epoxy resin was prepared with half blocked isocyanate as curing agent.
在此采用半封闭的甲苯二异氰酸酯作为固化剂制得了环氧树脂阴极电泳涂料。
10·This paper summarized the current research development of nitrite-free curing agent for meat and its products.
本文综述了肉类及肉制品中无硝腌制剂的研究进展。
1·This kind of resin composite manhole cover with glass fiber and resin as the basic material, curing agent, accelerator as auxiliary material.
这种树脂复合型井盖以玻璃纤维和树脂为基本材料，以固化剂、促进剂等为辅助材料制成。
2·Curing agent for thermosetting powder coatings.
热固性粉末涂料固化剂。
3·Within the dose range of curing agent and enlargement agent , the composition of sand consolidation agent is optimized by using quadrature test .
辅以少量增孔助剂，对砂孔进行固结试验。 在固化剂和扩孔剂用量范围内，利用正交试验优化固砂剂组成。
4·And the influence of re resin, curing agent and various fillers on the putty properties are discussed in detail.
并对re树脂、固化剂及各种填料对胶粘剂性能的影响进行了较详细的论述。
5·Therefore it becomes a tendency to develop nonionic type waterborne epoxy curing agent.
开发非离子型水性环氧固化剂是其发展趋势之一。